超高强度抗挤套管的开发

    Development of Extra-high-strength Anti-collapse Casing

    • 摘要: 中原油田东濮凹陷地区发育相当成熟的岩层要求套管单轴抗挤强度不低于103MPa,以抵御恶劣的地质条件。为了能和上下管柱设计使用的API标准规格的Φ177.8mm×10.36mm以及Φ177.8mm×11.51mm套管方便地连接,设计了非API标准规格的Φ180mm×11.51mm套管。采用纯净钢技术制造了这种规格的BG160TT超高强度抗挤套管。试制结果表明:该套管屈服强度不低于1210MPa,冲击功不小于110J,抗挤强度不低于110MPa。该超高强度抗挤套管已在中原油田东濮凹陷地区成功下井使用。

       

      Abstract: The salt bed stratum in Dongpu depression area of Zhongyuan Oilfield is developed so well that it is required that the uniaxial collapse strength of the casing must be no less than 103 MPa so as to cope with the severe geological conditions. A non-API Φ180 mm×11.51 mm casing is designed for easy connection with the API Φ177.8 mm×10.36 mm and Φ177.8 mm×11.51 mm casings as designed and used in both the upper and lower casing strings. Then the BG160TT extra-high-strength anti-collapse casing of the said non-API size is produced by means of the clean steel manufacturing technology. The preparation result shows that the said casing features such characteristics as yield strength ≥1 210 MPa,impact energy≥110 J,and collapse strength ≥110 MPa. Such extra-high-strength anticollapse casings have been successfully used in the well of Dongpu depression area of Zhongyuan Oilfield.

       

    /

    返回文章
    返回