• RCCSE中国核心学术期刊
  • CA、AJ、JST、CSA、IC、EBSCO收录期刊
  • 中国高质量科技期刊金属材料(金属学与金属工艺)领域分级目录期刊

无缝钢管淬火感应加热过程的数值模拟

黄军, 武文斐, 王宝峰, 李建超

黄军, 武文斐, 王宝峰, 李建超. 无缝钢管淬火感应加热过程的数值模拟[J]. 钢管, 2010, 39(5): 66-69.
引用本文: 黄军, 武文斐, 王宝峰, 李建超. 无缝钢管淬火感应加热过程的数值模拟[J]. 钢管, 2010, 39(5): 66-69.
Huang Jun, Wu Wenfei, Wang Baofeng, Li Jianchao. Numerical Simulation of Induction-heating Process for Quenching of Seamless Steel Tube[J]. STEEL PIPE, 2010, 39(5): 66-69.
Citation: Huang Jun, Wu Wenfei, Wang Baofeng, Li Jianchao. Numerical Simulation of Induction-heating Process for Quenching of Seamless Steel Tube[J]. STEEL PIPE, 2010, 39(5): 66-69.

无缝钢管淬火感应加热过程的数值模拟

基金项目: 

内蒙古高等学校科学技术研究项目(NO.NJ09088);内蒙古科技大学创新基金(2009NC051)。

详细信息
    作者简介:

    黄军(1980-),男,讲师,主要从事冶金热过程研究。

  • 中图分类号: TG156.3,TG162.84

Numerical Simulation of Induction-heating Process for Quenching of Seamless Steel Tube

  • 摘要: 利用中频电流的钢管感应加热工艺具有感应加热时间短,温度控制精确,环境友好等优点,已经广泛应用到钢管的淬火、弯曲等方面。针对某一典型品种无缝钢管淬火感应加热过程,特别是不同加热段采用不同频率下,进行数值模拟,获得钢管在整个加热过程中温度场的变化过程。利用该模型可以对感应加热过程参数进行优化,从而对无缝钢管淬火感应加热工艺的制定提供参考依据。
    Abstract: Induction heating process of seamless steel tube with midfrequency features short heating time,precise temperature control and environment-friendly operation,having been widely used for such purposes as steel tube quenching and bending,etc.Following the induction-heating process for quenching of a certain typical type of seamless steel tube,and in particular the variation of frequencies for each different heating section,numerical stimulation is conducted.,which leads to the identification of the temperature field change during the entire heating process of the tube.Thanks to the said simulation model,the operating parameters of induction heating process can be optimized,which in turn provides relevant important reference data as basis for establishing proper induction-heating process for quenching of seamless steel tubes.
计量
  • 文章访问数:  5
  • HTML全文浏览量:  0
  • PDF下载量:  5
  • 被引次数: 0
出版历程
  • 修回日期:  2010-07-22
  • 网络出版日期:  2023-12-14
  • 刊出日期:  2010-10-30

目录

    /

    返回文章
    返回